DATA SHEET
COVERAGE CAPACITY:
COATS
AREA
On smooth masonry surface
1 coat
2 coat
160 - 200 Sq.ft/ltr.*
80 - 100 Sq.ft/ltr.*
*Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.
TECHNICAL DATA :
PRECAUTIONS:
-
Do not apply when the ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs of application.
-
Do not over-thin or over-extend the brush.
-
Stir well and strain before use.
-
Tinted paints need thorough shaking immediately after tinter addition as well as before use.
Drying time Surface dry time 3 hours
Gloss Levels 75 - 85 on tin plate at 20 Deg Gloss Head
Stability of thinned paint To be used within 24 hours.
TECHNICAL DATA :
SAFETY MEASURES :
-
Store the container with the lid tightly closed in an upright position, in a cool, dry place.
-
Keep out of reach of children and away from eatables.
-
May be harmful if swallowed. In case of ingestion seek immediate medical attention.
-
Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.
-
Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation.
-
Do not pour leftover paint down the drain or in watercourses. In the event of spills, contain spillage using sand or earth.