DATA SHEET

 

 

 

  • Degrease and derust the surface. Ensure that the surface is free of dust, moisture, loose matter etc and allow to dry thoroughly.

 

  • Spray hammertone finish at a viscosity of 45-50 seconds and at a pressure of 30-40lbs/psi.

 

  • Allow to dry or stove as the case may be.

 

  • Apply a coat of Ocean Red Oxide Metal Primer / Ocean Zinc Chromate Metal Primer allowing to dry for 7-8 hours.

 

  • Apply a single coat of Ocean Hammertone Finish by spraying.

 

  • Stir well before use.

 

DIRECTIONS OF USE

Note:

Areas of application

Steel furniture's, iron castings, any fancy articles of steel, aluminium, tin etc

Thinner

 Use good quality thinner suitable for metallic & hammertone finish

Available colours 

       Emerald Green, Crimson, Light Blue, Light Green, Dark Grey

 TECHNICAL DATA :

SAFETY HAZARDS:

SAFETY HAZARDS:

FIRE HAZARD CLASS

Non- flammable

 

 SAFETY MEASURES

Recommended to wear protective

clothing like gloves, overall, etc.

        Finish                                                   Glossy

 

        Covering Capacity                             13-15 sqmt/ltr

 

        Drying Time                                         Surface Dry- less than 5 minutes    

 

        Hard Dry                                              Less than 8 hours 

 

        Stoving Schedule                               120◦C for 30 minutes

 

        Flash Point                                           Below 95◦F

 (Information in this leaflet is given in good faith, but without warranty)