DATA SHEET

COVERAGE CAPACITY:

COATS

AREA

1 COATS ON

NORMAL MASONARY

SURFACE

100 - 110 Sq.ft/ltr.*

  PRECAUTIONS:

  • Stir well before use.

 *Actual Coverage may vary from the quoted coverage due to factors such 

  as method and mode of application and surface roughness and porosity. 

 TECHNICAL DATA :

          Recommended for                       Application on Iron and Steel of all categories

 

          Colour                                         Red Oxide

 

          Thinner                                        Add 5-10% GP thinner for viscosity adjustment

 

          Surface preparation                    Ensure that the metal surface is clean and free from dust,                                                                dirt, grease, rust and scale

 

          Application                                  Apply1 or 2 coats allowing atleast 6 hours between coats.

 

          Drying                                         Air drying – Touch dry  (Not more than one hour)

                                                                                 Hard dry   ( Not more than 10-12 hours)

 

         Packing                                       Available in 20 litres, 10 litres, 1 litre and 500 ml

FIRE HAZARD CLASS

Non- flammable

 

 SAFETY MEASURES

Recommended to wear protective

clothing like gloves, overall, etc.

 (Information in this leaflet is given in good faith, but without warranty)