DATA SHEET

DIRECTIONS OF USE

  • Smoothen the surface by filling dents with thin coats of Ocean wall Putty.

  • Allow it to dry for 2-3 hours.

 

  • Sand lightly with emery paper 180 and wipe clean.

  • Dilute the Ocean Water Base Primer as per requirement and apply with brush on the surface as well as on the puttied areas.

COVERAGE CAPACITY:

COATS

AREA

Depending on surface and surface preparation.

1 coat

20 - 25 Sq.mtrs/ltr.*

 *Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.

 TECHNICAL DATA :

  PRECAUTIONS:

  • Store the product in ambient and well-lit conditions away from the source of ignition and fire.

 

  • Avoid eye and skin contact. In case of contact, wash with plenty of water.

 

  • Do not inhale or inject. In case of inhalation, move and seek fresh air.

 

  • Use protective equipment like rubber/polythene gloves, safety goggles and face mask while handling the paint.

     Drying time                                       Surface dry time 3 - 5 hours

     Gloss / Sheen Levels                         Matt

 

      Shelf Life                                           3 years in originally tightly closed containers away from                                                                   direct sunlight and excessive heat.

         

 (Information in this leaflet is given in good faith, but without warranty)