DATA SHEET

DIRECTIONS OF USE

 

 

  • Prepare wall surface by scraping off flaked coatings and ensure removal of fungus and algae

        growth with suitable biocide treatment.

 

  • The surface must be free from loose particles, dust and moisture.

 

  • Take maximum precautions where the water tends to accumulate, i.e places like parapet,

       sunshade, etc.

  • The exterior surface must be free from seepage and constant dampness. During

        the rainy season, allow 2-3 days of sunshine for surface to dry before starting painting.

  • Newly plastered walls must be allowed to cure for 6 months before painting.

  • To 1 ltr of Ocean Exterior Emulsion add  750 ml of clean portable water. For  best results,

        apply 2 coats. Between coats, allow minimum of 4 hours gap.

 

 

 

 

 

 

 

 

 

 

 *Actual Coverage may vary from the quoted coverage due to factors such

  as method and mode of application and surface roughness and porosity.

 

 

 

 

 

 

   

COATS

AREA

2 COATS ON

NORMAL MASONARY

SURFACE

55 - 60 Sq.ft/ltr.*

  PRECAUTIONS:

  • Do not apply putty or cement primers on exterior walls. Cracks can be filled with white cement or mixture of cement and sand if necessary.

 

  • Do not over thin the paint. Over dilution of Ocean Acrylic Exterior Emulsion may result in shade variation, poor hiding, poor bonding and flaking.

 

  • Do not use any universal strainers or other colourants.

 TECHNICAL DATA :

   Areas of application                         RCC, Masonary, Asbestos, etc

 

   Viscosity                                            90-100 krebs unit at 30◦ C Stormer Viscometer

 

   Consistency                                       Smooth & Flowing

 

   Thinner                                               Clean portable water

   Mode of application                         Brush, Roller or Spray

   Coverage                                           55 to 60 sq ft, per kg/ 2 coats ; 45 to 50 sq ft/ltr for coats                                                                          depending on the porosity and absorbtion of the surface.

   Minimum DFT                                   35-40 Microns

   Drying Time                                       Touch dry- 30 minutes at 30◦ C & 60 ± 5% R.H

   Recoating                                           After an interval of 4 hours

   Finish                                                  Smooth Matt

   Shade                                                  As per shade card

 

   Shelf Life                                             1 year in closed container

  PRECAUTIONS:

  • Do not apply putty or cement primers on exterior walls. Cracks can be filled with white cement or mixture of cement and sand if necessary.

 

  • Do not over thin the paint. Over dilution of Ocean Acrylic Exterior Emulsion may result in shade variation, poor hiding, poor bonding and flaking.

 

  • Do not use any universal strainers or other colourants.

COVERAGE CAPACITY:

FIRE HAZARD CLASS

Non- flammable

 

 SAFETY MEASURES

Recommended to wear protective

clothing like gloves, overall, etc.

 (Information in this leaflet is given in good faith, but without warranty)